Stages Power L Shimano Dura-Ace R9100 Powermeter
Stages Power L Shimano Dura-Ace R9100 Powermeter
The Gen 3 Stages Dura Ace 9100 power meters is positioned discretely on the inner side of the left crank arm, weighing in at a mere 15g. It's accurate (±1.5%) and easy to install. Stages power meter always come mounted to the left crank arm. So all you have to do is find the model, which is compatible with your existing crank set.
Stages Power L Shimano Dura-Ace R9100 Powermeter
The Gen 3 Stages Dura Ace 9100 power meters is positioned discretely on the inner side of the left crank arm, weighing in at a mere 15g. It's accurate (±1.5%) and easy to install. Stages power meter always come mounted to the left crank arm. So all you have to do is find the model, which is compatible with your existing crank set and simply swap the left crank arm. Stages Power has a wide range of adaptation over the bike industry's aluminum crank models.
For Dura-Ace riders Stages offers a power meter as a replacement non-drive crank arm for existing Dura-Ace 9100 model cranks. Riders looking to add power to their existing crank need only select length, as the Stages Power meter for Dura-Ace fits all styles of Shimano road crankset, including: compact and standard.
Frame compatibility
Since the power meter is placed on the inside of the crank arm, a clearance of at least 10mm between crank and chain stay / direct-mount brake is needed. Especially bikes with direct-mount brakes may cause problems.
Specifications
Sensor Location: |
left crank arm |
Accuracy: |
± 1.5% |
Weight: |
adds 15gr to left crank arm |
Battery Life: |
200+ hours (CR2032) |
Battery Replacement: |
Tool free |
Wireless Technology: |
ANT+, Bluetooth Smart Ready, NFC |
Firmware Upgrades: |
yes, wireless |
Compatible Software: |
Training Peaks, Strava, Garmin Training Center and others |
Power Range (Watts): |
0 to 2500 |
Cadence range (rpm): |
20-220 |
Crank Compatibility: |
Shimano Hollowtech II Road |
Available lengths: |
165, 170, 172.5, 175mm |
Active temperature compensation |
|
Accelerometer based cadence measurement |
REFERENCE NUMBER: DR9L