Sram Force 2X 107 BCD chainring bolt kit black Aluminum bolts for SRAM Force 2X 107 BCD chainrings.These chainring bolts from SRAM are used to attach 4-arm chainrings with 94 or 107mm hole circles to Force (D1) 2-speed cranks.
Shimano Ultrega FC-6800 Chainring Shimano replacement chainring with 34 teeth, for the Ultegra FC-6800 11-speed chainring.
SRAM Rival AXS 2x12-speed crankset This SRAM Rival series crankset is compatible with DUB inner bearings and is designed for two speed forward and twelve speed reverse drivetrains. The 13 tooth X-Range ™ spacing creates a good foundation for smooth gear gradation.
Sram Rival 1X Wide AXS DUB Cranks Stylish and safe direct mount X SYNC chainrings from the company that originated the 1x drivetrain for the ultimate in long-term consistent chain control.
Rotor 2Inpower DM Road Potentiometer 2INpower (“twin” power) DM Carretera is currently considered the most sophisticated potentiometer on the market. 2INpower measures the left and right legs independently to provide accurate data on the balance, cadence and efficiency of your pedaling.
SRAM BB30 PressFit bottom bracket cups SRAM saw an opportunity to make a better press fit system for the bottom bracket, combining all the best of BB30 and PressFit in one package. PressFit 30 will feature an integrated gasket, pre-assembled in the cups, to further extend the life of the bearing.
Shimano Quick Link XTR QUICK LINK 12V / 11R x2 The Shimano XTR QUICK LINK chain hitch is exclusive to the new drivetrain allowing easy connection.
SRAM BB GxP Team bottom bracket shell GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. The GXP system captures the left side bearing between the axle and the left crank arm while allowing the drive side bearing to float axially on the shaft, thus eliminating the need for side load bearings during adjustment.
Rotor Press Fit BBright Road Bottom Bracket 24mm Black The Rotor Press Fit 4624 BBright bottom bracket is a perfect fit for 46mm diameter Press Fit compatible frames with 24mm bottom brackets.
SRAM Bottom Bracket Adapter Kit From PressFit 30 to BSA Allows you to use Sram / Truvativ Gxp and Shimano cranks on a BB30 pres fit frame The adapter is snapped into the frame hole with BB 30 and the cups are screwed directly onto the adapter
Sram Force Crankset SRAM Force has lightweight carbon cranks and is made for 2x12 drivetrains in combination with a DUB bottom bracket. The 13-tooth X-Range™ gradation gives you smooth shifting and nice gear jumps, so you'll always find the right gear.
Revolutionary modular bottom bracket composed of hollow aluminum cranks, 30mm aluminum bottom bracket. and one-piece direct mount spider round chainring set. The spider is fixed to the central axis by means of a groove that allows an unknown lightness and rigidity. Possibility of mounting plates separately or in solidarity with the spider (more rigid and light). Weight: 633gr.
Revolutionary modular bottom bracket composed of hollow aluminum cranks, 30mm aluminum bottom bracket. and oval chainring and direct mount spider assembly. The spider is fixed to the central axis by means of a groove that allows a total adjustment of the OCP of the Q-Rings. Possibility of mounting plates separately or in solidarity with the spider (more rigid and light). Weight: 633gr.
Bottom bracket adapter, valid to install 24mm diameter cranks on any PF30 / BB30 bottom bracket (68mm wide and 30mm internal diameter box). It reduces the internal diameter of the bearing from 30 to 24mm and increases the width of the bottom bracket up to 89mm. to be able to install cranks with 24mm thick axle (Shimano HollowTechII and FSA MegaExo).
Bottom bracket reducer, valid for installing 24mm diameter cranks on an EVO386 bottom bracket (86mm wide and 46mm diameter case) Compatible with any 30mm internal diameter bearing / bottom bracket. Reduces the internal diameter of the bearing from 30 to 24mm to be able to install cranks with a 24mm thick axle (Shimano HollowTech / FSA MegaExo)
Rotor Qrings SH1x12 oval MTB chainring Q34t DM Rotor Rrings oval chainring compatible with Shimano 12-speed HG + chain in black with 34 teeth.
Rotor QRings Spidering Aero Black 52/36 Chainrings Rotor Spidering double chainrings are made from one piece and are mounted on the shaft using the Direct Mount method without the need for tools.
CeramicSpeed BB86 / 92 BB Reducer Bottom bracket reducer, valid for installing Sram DUB cranks with a 28'99mm thick axle on a BB86 / 92 bottom bracket with 30mm internal bearing diameter.