Look Kéo 2 Max Carbon pedals black

Look Kéo 2 Max Carbon pedals with very resistant stainless steel support surface and oversized Chromoly axle. It is a light pedal of 122 grams with adjustable tension from 9 to 15.

Look Kéo 2 Max Carbon Pedals Features:
Use: Road (from leisure to competition)
Body: Composite
Shaft: Steel
Threaded: 9/16 x 20 mm.
Bearing: 2 ball bearings and 1 needle bearing
Shaft/sole height: 15.7 mm.
Pedal axle/crank arm distance: 53 mm.
Multitensioner: Yes, adjustable from 9 to 15 mm.
Cleats: Kéo Grip Cleats
Angular freedom: 0, 4.5 or 9 degrees depending on the cleat (black, gray or red)
Pedal weight: 122 gr. (312 gr. with cleats and screws)
Colors: Graphite body / Black lever
Accessories: Delivered with the pedals is a pair of gray Kéo Grip cleats and hardware (6 5 x 11 mm screws and 6 washers)

The Look Kéo 2 Max Carbon pedals have a 12% larger support surface than a Kéo Carbon for more efficient and comfortable pedaling. In order to further improve effort transmission and pedal life, this surface is made of stainless steel overmolded on the pedal body.

At 122 grams, the Look Kéo 2 Max Carbon is one of the lightest pedals in its category. This has been possible thanks to the use of composite materials that combine weight savings and improved resistance.

The Kéo 2 Max Carbon axle line allows you to maintain the support height while using an oversized steel axle. It is composed of 2 miniature ball bearings (12 mm internal x 18 mm external) and a needle bushing. Look axles are only validated after a rotation test of 1 million cycles at 100 rpm with a 90kg load in the center of the pedal and an off-center rotation (which creates a shock each revolution). This test is far superior to the current EN14781 standard.

In the Look Kéo 2 Max Carbon pedals, very particular attention has been paid to reliability: a composite body, the stainless steel support surface, the oversized axle and the double sealing make this pedal a very safe and durable product.

Thanks to its 14 mm long thread, the new Look axle allows an additional 2 mm Q-Factor adjustment using a specific washer available as a spare part. Thus it goes from 53 to 55 mm.