Features Krayton Road Tube 700x23/28C Presta FV60 Thin Valve
- - Wheel size: 700x25
- - Valve type: Presta FV60 slim
Krayton Road Thin Valve Presta FV60
- Wheel size: 700x23
- Valve type: Presta FV60 slim valve
This inner tube is suitable for a tire with a diameter of 700, a section of 23 to 32 and a Presta valve of 80 mm.
Inner tube from 700 x 23 to 700 x 32 Presta valve 80 mm for 700 (28 inch) tires. Long valve for profiled rims, which avoids having to use a valve extender
- Compatibility: Tires diameter 700, section 23 to 32mm. Presta valve 80mm ETRTO 23/32-622
- Tightness / Impermeability: Optimized composition to ensure good sealing of the air chamber
How to choose your inner tube
Check the information indicated on the side of the tire (diameter and section). For example, 27.5 x 1.90 means the tire is 27.5 inches in diameter and 1.90 inches wide.
On the sidewall of the tire you will also find the dimensions in mm within the international ETRTO unit.
Place the air chamber
Check out our video before you start. Inflate the inner tube a little beforehand to avoid the risk of snagging.
Insert the valve into the valve hole, note the type of valve suitable for your rim. Place the entire tube inside the tire, push the tube so that it sits inside the rim. Mount the tire carefully so as not to pinch the inner tube.
mount a tire
Start by mounting the tire on the valve.
Finish the assembly on the side opposite the valve to avoid any pinching.
Never mount the tire with a screwdriver or a tire lever because you risk pinching and puncturing the inner tube.
inflate the tire
Carefully inflate the tire to the manufacturer's recommended pressure (indicated on the tire sidewall in psi or bar, 1 bar = 14.51 psi).
Regularly check that the tire is correctly positioned during inflation.
To avoid any puncture caused by pinching and to obtain the best performance from your tyre, we advise you to check and adjust, if necessary, the tire pressure before each ride.
Main part 80% Rubber - Isobutylene-isoprene rubber (IIR) - Butyl, 20% Brass
transport the inner tubes in a container that protects them from perforation (B'TWIN transport drum, original packaging...).